5. How to Print Electrifi™ Successfully (And Common Pitfalls to Avoid)
Reduce user frustration by clearly stating what works and what does not.
ELECTRIFI 101
1/7/20261 min read
Electrifi™ prints best when treated with care rather than speed:
Key rules:
Use direct-drive extruders only
Avoid Bowden systems and AMS-style feeders
Print slowly (10–30 mm/s)
Minimize or disable retraction
Use larger nozzles (≥0.4 mm, preferably 0.6 mm)
Turn off part cooling completely for Conductive PE
Strong hotend cooling is still required to prevent heat creep—but printed parts themselves should cool naturally.